DeWalt DCK264P2-18V-XR Cordless Li-ion Brushless Nailer Twin Pack in Tough System Box

Gas-free, brushless nailer twin kit comprised of 1st fix and 2nd fix nailers. Brushless motors produce longer run times, quicker readiness to fire, less recoil and more durability when firing short nails. Mechanical, gas-free operation offers consistent performance in the harshest of environments, between -20°C to 50°C, with minimal servicing. Both tools feature LED fault indicators, tool-free jam clearance and reversable belt/rafter hooks. Sequential mode to allow precision placement and bump mode for production speed.

The 1st fix nailer fires 50-90mm framing nails, at up to 2 per second. 2 speeds (power levels) optimise the nailer for firing all lengths of nails. Versatile 30-34° magazine angle will accept most dipped head and off-centre, round head paper tape or wire-weld collated framing nails. Dry fire lock-out ensures the tool is protected from firing without nails in the magazine and a contact trip lock-off switch prevents accidental discharge of fastener.

The 2nd fix nailer fires 32-63mm 16G nails, at up to 4 per second. A non-mark tip is included. Features stall-release, thumb wheel depth adjustment, trigger and contact trip lock-off to prevent accidental discharge of fastener. LED work light increases visibility in poorly lit areas.

High capacity batteries feature state of charge indicators.

Kit Includes:

• 1 x DCN692 18V 1st Fix Nailer
• 1 x DCN660 18V 2nd Fix Nailer
• 2 x 18V 5.0Ah Li-Ion Batteries
• 1 x 90min Multi-Voltage Charger
• 1 x ToughSystem DS400 Kit Box

Warranty Specifications

• 3 Year European PT Guarantee (subject to Registration with Dewalt)

DCN692 1st Fix Nailer

Specifications:

•  18V XR Li-Ion Two Speed Framing Nailer featuring BRUSHLESS motor technology

• Two speeds - or power levels - to optimise the nailer for firing all lengths of nails

• Benefit from longer runtime, quicker readiness to fire, less recoil and more durability when firing short nails

• BRUSHLESS motor technology offers the power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods

• The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed

• Mechanical rather than gas operation offers consistant performance at temperature between -20 and 50 degrees celcius and minimal cleaning/service requirements.